www.changlin.com.cn Oil Viscosity Recommendations The use of multi-viscosity lubricating oil has been found to improve oil consumption control and improve engine cranking in cold temperatures while maintaining lubrication at high operating temperatures. While 15W-40 oil is recommended for most climates, refer to the accompanying table for oil viscosity recommendations for extreme climates. NOTE: Limited use of low viscosity oils, such as 10W-30 may be used for easier starting and providing sufficient oil flow at ambient temperatures below-5°C [23°F], However, continuous use of low viscosity oils can decrease engine life due to wear. Refer to the accompanying chart.
New Engine Break‐In Oils Do not use special “break-in” lubricating oils for new or rebuilt Cummins engines. Use the same type of oil during the “break-in ” as that which is used in normal operation. Recommended Oil Change Intervals Refer to the following flowchart for the recommended oil change interval based on engine application. 160 / 167 pages