www.changlin.com.cn Low Pressure Fuel Line‐Replacement Preparatory Step: Clean all debris from around the fittings. Fuel Filter Head Adapter‐Replacement Preparatory Steps: Clean debris. Remove fuel filters. 24 mm Remove the retaining nut, filter head adapter and sealing washers. Install in the reverse order of removal. Torque Value: 32 N*m [24 ft-lb] Lift Pump-Replaecement Preparatory Steps: 99 / 167 pages 14 mm, 17 mm Disconnect the fuel line from the lift pump and filter head. Use two wrenches to disconnect the line from the lift pump. 14, 17 mm Install the fuel line to the lift pump and filter head. Use two wrenches to tighten the connection to the lift pump. NOTE:
Do not over tighten the connection. Fuel leaks can result from over tightening. Torque Value: 24 N • m [18 ft-lb] 14 mm, 17 mm Disconnect the fuel line from the lift pump and filter head. Use two wrenches to disconnect the line from the lift pump. 14, 17 mm Install the fuel line to the lift pump and filter head. Use two wrenches to tighten the connection to the lift pump. NOTE: Do not over tighten the connection. Fuel leaks can result from over tightening.