Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn Fuel System Repair Summary Fuel System Components‐Cleaning Thoroughly clean all fittings and components before removal. Make sure that the debris, water, steam, or cleaning solution does not reach the inside of the fuel system. 98 / 167 pages Tools Preparatory Steps Lift Pu mp 13,14 and 17 mm Wrenches Clean debris. High Pressure Lines 13 mm Socket, 14,17, and 19mm Open End Wrenches and a Torque Wrench Clean debris. Injector Fuel Drain 10 mm and 19 mm Open End Wrenches, 10 Manifold mm and 13 mm Sockets, and a Torque Wrench.

Manifold mm and 13 mm Sockets, and a Torque Wrench Injectors Ratchet, 24 mm Socket (deep well), and a Torque Wrench Disconnect the high pressure lines Wrench and fuel drain manifold. Injection Pump 10 mm Wrench, Ratchet, 22 mm Socket, 75 mm T-Bar Remove high pressure lines, supply line and return line. Remove the AFC air line, oil line (s), fuel shutoff solenoid and control linkage. Puller (w/2 8 mm cap screws) 1/2 in. open end wrench flat Screwdriver 13 mm Socket, 13 mm Wrench, Hammer, flat Chisel and a Torque Wrench. Fuel Solenoid Robert Bosch 24 mm Wrench, Lucas CAV 22 mm Wrench Label and disconnect wiring. Fuel Filter Head 24 mm, 75-80 mm and 90-95 mm Filter Wrench Clean debris.