Cummins — HG130, HG170 Engine Manual

www.changlin.com.cn 14 mm, 16 mm Position the alternator and install the mounting capscrew. Torque Value: (A) 24 N • m [18 ft-lb] (B) 43 N• m [32 ft-lb] 13 mm Install the drive belt. NOTE: After the tensioner has been raised to remove/in- stall the belt, check the torque of the tensioner cap screw. Torque Value: 43 N• m [32 ft-lb] Fill the cooling system. Operate the engine and check for leaks. Caution: Be sure to vent the engine and after cooler during filling, to remove air from the coolant system or over-heating will result. 97 / 167 pages