CLAAS ACADEMY LEXION II Additional functions Key to diagram 747 - Double restrictor valve . . . . . . . . . . . . . . . . . . . .
Ш 0.3 mm Y98 - Solenoid valve for slowing down the rotor variable-speed drive Y99 - Solenoid valve for speeding up the rotor variable-speed drive Y89 - Solenoid valve for slowing down the front attachment variable-speed drive Y90 - Solenoid valve for speeding up the front attachment variable-speed drive T - Connection to tank P1 - Pump connection via returns valve A6 - Intake speed adjusting ram port A11 - Rotor speed adjusting ram port a - Restrictor valve – 1 notch b - Restrictor valve – 2 notches The oil in the hydraulic ram is locked at A by means, the ball in the valve. Function – neutral Function – speeding up The solenoid valve (Y90/Y99) and the returns valve are switched.
The relative spool is then operated and pushes the ball off its seat. At the same time, the return flow to tank is blocked off. The pressure then builds up, and pushes the ball of the other solenoid valve (Y89/Y98) off its seat. The oil then flows via the notch in the restrictor (747) and out through the port A. Function – slowing down the drum speed The solenoid valve (Y89/Y98) is switched without the returns valve. The respective spool is then operated and pushes the ball off its seat. At the same time, the return flow to tank is released via the two notches of the restrictor valve (747) and the valve insert of the non switched solenoid valve (Y90/Y99). Note:
So that speeding up and slowing down the drum speed are the same, the oil coming from the system when the variator is opening with the aid of the springs goes through the restrictor (b) with the two notches. Note: The solenoid for the “slow” function is fitted with a return spring and is marked with an “F” on the face side. 11/2001 4-27