CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

CLAAS ACADEMY LEXION II Additional functions Key to diagram 734 - One-way valve (lock-up valve unit) Y70 - Solenoid valve for unlocking cutterbar springs Y71 - Solenoid valve for locking cutterbar springs T - Connection to tank P1 - Pump connection via the returns valve A9 - Hydraulic ram port for locking the cutterbar springs B9 - Hydraulic ram port for unlocking the cutterbar springs V - Valve insert K - Plunger Both ends of the hydraulic ram are locked by the one-way valves (734) on ports A and B. Function – neutral Function When required, the relative solenoid valve (Y70/Y71) is operated and at the same time the returns valve is also opened.

The relative spool pushes the ball off its seat and at the same time closes the flow to tank. The pressure then flows down to the lock valve, then builds up and presses on the plunger. The plunger (K) then operates the opposite lock valve (734) on port A or B. The return oil from the ram, then flows back to tank via the valve insert of the non switched solenoid valve (Y70/Y71). The pressure then builds up and operates the second one-way valve (734). The oil then flows out of the port and to the hydraulic rams either extending or retracting them. Note: With the cutterbar springs locked, then the AUTO CONTOUR is out of operation. 11/2001 4-31