CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

CLAAS ACADEMY LEXION II Additional functions Key to diagram 611 - Flow control valve for straw / chaff spreader . 8 – 19 l/min. 735 - Pressure relief valve for chaff spreader . . . . . . 150 bar T - Connection to tank P - Connection to the hydraulic pump A - Straw / chaff spreader hydraulic motor port D - Restrictor H - Hand wheel K - Regulation spool S - Spool Function The flow control valve (611) redistricts the oil flow from the pump (P) to the port A and can be adjusted by the hand wheel (H) to give a flow between 8 - 19 l/min . The pressure relief valve (735) switches at a system pressure of 150 bar .

The hand wheel (H) turns the spool (S), which turns the regulating spool (K) and therefore turn the radial into an axial movement. The restrictor (D) on the control corner either opens or closes. The narrowing or widening of the cross section in the restrictor (D) regulates the flow out of the ports (A). The oil flow from the pump (P) flows through the regulation spool (K), over the cross section of the restrictor (D) to the port (A). There is pressure from the restrictor (D) and presses against the spring pressure of the regulating spool (K), and part of the flow is returned to tank (T).

The quantity of oil is dependant on the back pressure from the restrictor spool (D) so that a constant oil flow is supplied to the port (A). 11/2001 4-39