CLAAS ACADEMY LEXION II Additional functions Key to diagram 322 - Hydraulic ram for grain tank unloading aid . . . Ш 40 mm 410 - Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ш 1.5 mm Y36 - Solenoid valve for moving grain tank unloading aid forward Y37 - Solenoid valve for moving grain tank unloading aid backward Z25 - Oil pressure switch . . . . . . . . . . . . . . . . . . . . . . . 120 bar Z26 - Oil pressure switch . . . . . . . . . . . . . . . . . . . . . .
80 bar T - Connection to tank P1 - Pump connection via returns valve A10 - Hydraulic ram port for moving grain tank unloading aid backward B10 - Hydraulic ram port for moving grain tank unloading aid forward V - Valve insert K - Plunger Function – neutral Both side of the hydraulic ram are connected over the valve inserts and the non switched solenoid valves (Y36/Y37), and so that when the unloading aid is switched off it can be operated by hand. Function When required, the relevant solenoid valve is operated (Y36/Y37). The switched spool pushes the ball off its seat and closes the flow to tank.
The flow then flows out to the ram (322) through the solenoid that is operated, and the return oil is delivered back via the solenoid (Y36/Y37) that is not operated and then back to tank. The oil pressure switches (Z25/Z26) automatically switch when the hydraulic ram (322) reaches its end stop. 11/2001 4-41