TIC LEXION 480-405 Front attachment Key to diagram 327 - Hydraulic ram for folding the maize picker 329 - Hydraulic ram, folding cover 330 - Hydraulic ram for adjusting the snap plates 361 - Hydraulic ram for maize picker locking 624 - Lock valve, folding cover 727 - Return flow restrictor . . . . . . . . . . . . . . . . . . .
Ш 1.5+4x2 mm 734 - One-way valve (lock-up valve unit) 748 - Restricted one-way valve 801 - Quick release connector (P/T) for front attachment Y42 - Solenoid valve for folding out the maize picker (work position) Y43 - Solenoid valve for folding in the maize picker (transport position) Y46 - Solenoid valve for closing the snap plates Y47 - Solenoid valve for opening the snap plates T - Connection to tank P1 - Parallel connection to valves from the returns valve A2 - Hydraulic ram port for folding in the maize picker B2 - Hydraulic ram port for folding out the maize picker A3 - Hydraulic ram port for narrowing the snap plates (close) B3 - Hydraulic ram port for widening the snap plates (open) Folding function When folding into the transport position, the covers on the separators are raised by the hydraulic ram (329) until the pressure in the system rises enough that the hydraulic rams (327) for the side sections raise.
When folding into the work position, the covers on the separators can be lowered first, when the lock valve (624) is opened mechanically when the side sections are unfolded. The side sections for the 8 row header are independently mechanically locked. For this the conical drives are regulated against the spring in the hydraulic ram (361), until they engage in the groove. When folding in the transport position, the hydraulic ram (361) operate parallel so that the drives lock on the side sections. The return flow restrictor (727) stops the possibility of a collision of the side sections when folding into the transport position. Note:
A description and information about the operation of the pressure relief valve and the returns valve can be found in chapter 3. 03/2004 5-13