CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Front attachment Key to diagram 406 - Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ш 0.8 mm Y22 - Solenoid valve for raising the reel Y23 - Solenoid valve for lowering the reel T - Connection to tank P1 - Pump connection via returns valve A1 - Reel height adjustment hydraulic ram port The hydraulic ram is tightly locked by the ball valve in the valve insert at the connection A. Function – neutral Function reel raise The solenoid valve (Y22) and the returns valve are switched together. The relative spool pushes the ball off its seat and at the same time shuts off the flow to tank.

The oil then flows to the second solenoid valve (Y23) where the pressure pushes the ball off its seat and flows out of port A. Function reel lower The solenoid valve (Y23) is switched without the returns valve. The corresponding spool pushes the ball off its seat, thus allowing the oil to flow from the port A, over the valve insert, across the solenoid (Y22) that is not operated and finally back to tank. 03/2004 5-19