TIC LEXION 480-405 Front attachment Key to diagram 408 - Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ш 1.2 mm 734 - One-way valve (lock-up valve unit) Y24 - Solenoid valve for reel forward Y25 - Solenoid valve for reel backward T - Tank port P1 - Pump port via returns valve A2 - Reel fore and aft adjustment backward hydraulic ram port B2 - Reel fore and aft adjustment forward hydraulic ram port K - Piston Both side of the rams are tightly locked up by the one-way valve (734) at ports A and B. Function – neutral Function When required, the relative solenoid valve (Y24/Y25) is operated and at the same time the returns valve is also opened.
The relative spool pushes the ball off its seat and at the same time closes the flow to tank. The pressure then flows down to the lock valve, then builds up and presses on the plunger. The plunger (K) then operates the opposite lock valve (734) on port A or B. The return oil from the ram, then flows back to tank via the valve insert of non switched solenoid valve (Y24/Y25). The pressure then builds up and operates the second lock valve (734). The oil then flows out of the port and to the hydraulic ram.
Safety switching with the folding cutterbar The safety valve locks the oil flow for several functions on the cutterbar, when there is a fault and the electrical connection to the safety switch is lost. The safety switch allows the folding procedure to continue, only when the reel is completely down and back and the transport regulator has been slackened off. 03/2004 5-25