CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Front attachment Key to diagram 316 - Hydraulic ram for reel fore and aft adjustment A - Hydraulic ram port for reel fore and aft adjustment backward B - Hydraulic ram port for reel fore and aft adjustment forward K - Plunger V - Base valves Simultaneous function The two rams are so designed that the surface area of the left-hand ram is the same as that of the right-hand ram. The rams therefore provide simultaneous motion so that they both travel in parallel regardless of the load applied. Base valves The base valve (V) operates when ever the rams reach their end stops so that the rams can get bled.

After a repair it is necessary to hold both rams against the end stop using hydraulic pressure, for about 15 seconds. Note: The rams on the folding cutterbar work in the same way, except for the fact that there are three rams. 03/2004 5-27