CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Front attachment Key to diagram 734 - One-way valve (lock-up valve unit) Y65 - Solenoid valve for folding the cutterbar to work position Y66 - Solenoid valve for folding the cutterbar to transport position Y69 - Solenoid valve for lock valve T - Connection to tank P1 - Pump connection via returns valve A1 - Hydraulic ram port for reel raise and lower A3 - Hydraulic ram port for locking in working position B3 - Hydraulic ram port for locking in transport position K - Plunger Both sides of the rams are locked up by the lock valve (734) at ports A and B.

Function – neutral Function When required the relative solenoid valve (Y65/Y66) is operated, and at the same time the returns valve is also opened. The relative spool pushes the ball off its seat and at the same time closes the flow to tank. The pressure then flows down to the lock valve, then builds up and presses on the plunger. The plunger (K) then operates the opposite one-way valve (734) on port A or B. The return oil from the ram, then flows back to tank via the valve insert of the non switched solenoid valve (Y65/Y66). The pressure then builds up and operates the second one-way (734). The oil then flows out of the port and to the hydraulic ram which travels in or out.

Safety switching with the folding cutterbar The safety valve (Y69) locks the oil flow for several functions on the cutterbar, when there is a fault and the electrical connection to the safety switch is lost. The safety switch allows the folding procedure to continue, only when the reel is completely down and back and the transport regulator has been slackened off. 03/2004 5-31