TIC LEXION 480-405 Front attachment Key to diagram 734 - One-way valve (lock-up valve unit) 748 - Restricted one-way valve 801 - Quick release coupling (P/T) for front attachments Y42 - Solenoid valve for folding out the maize picker (work position) Y43 - Solenoid valve for folding in the maize picker (transport position) Y46 - Solenoid valve for closing the snap plates Y47 - Solenoid valve for opening the snap plates T - Connection to tank P1 - Pump connection via returns valve A2 - Hydraulic ram port for folding in the maize picker B2 - Hydraulic ram port for folding out the maize picker A3 - Hydraulic ram port for narrowing the snap plates (close) B3 - Hydraulic ram port for widening the snap plates (open) K - Plunger Both sides of the rams are tightly locked up by the one-way valve (183) at ports A and B.
Function – neutral Function When required the relative solenoid valve (Y43/Y42 - Y46/Y47) is operated, and at the same time the returns valve is also opened. The relative solenoid valve pushes the ball off its seat and at the same time closes the flow to tank. The pressure then flows down to the lock valve, then builds up and presses on the plunger. The plunger (K) then operates the opposite one-way valve (734) on port A or B. The return oil from the ram then flows back to tank via the valve insert of the non switched solenoid valve (Y43/Y42 - Y46/Y47). The pressure then builds up and operates the second lock valve (734).
The oil then flows out of the port and to the hydraulic ram which travels in or out. 03/2004 5-39