CLAAS ACADEMY LEXION II Low pressure hydraulics Key to diagram 112 - Filter cartridge 729 - Pressure relief valve . . . . . . . . . . . . . . . . . . . . . 19 + 4 bar T - Connection to tank P - Connection to the charge pump of the hydrostatic drive A - Connection to the hydraulic ram K - Plunger H - Eccentric pin for emergency use Function When the solenoid valve is not energised, then the connection from the ram (A) and the return to tank (T) is opened via the notches in the plunger (K). The low pressure (P) is sealed by the end of the plunger (K).
When the solenoid is energised, the plunger (K) is raised against the pressure of the spring and therefore opens the pressure line (P) and closes the return to tank (T) line. The oil then passes out through the port (A) and the return to tank (T) is locked. Note: In an emergency, the eccentric pin (H) can be turned about 90°. Please ensure that the stop for the eccentric pin (H) is not passed as it will be sheared off and be forced out of the housing by the oil pressure. Pressure relief valve with filter cartridge (to: 466-0165 / 454-0255 / 453-0041 / 452-0016) 729 112 H 1086.2 11/2001 6-13