TIC LEXION 480-405 SAUER hydrostatic drive Key to diagram 1 - Oil tank 2 - Sieve filter for the working hydraulics 3 - Sieve filter for the hydrostatic drive and steering 7 - Return oil one-way valve for the working hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 bar 8 - Return oil one-way valve for the hydrostatic drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 bar 10 - Gear pump for the steering . . . . . . . . . . . . . . . . . 11 cmі 11 - Gear pump for the working hydraulics . . . . . . . . 19 or 14 cmі 98 - Solenoid valve for the servo line 122 - Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ш 2 mm 124 - Oil cooler 143 - Connection for the low pressure hydraulics 144 - Connection for the return flow from the steering 200 - Pump housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 R 100/130 201 - Charge pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 cmі 202 - Filter cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 µm 203 - By pass valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 bar 205 - Charge pump pressure relief valve . . . . . . . . . . 30 ± 2.5 bar 206 - Control pressure, pressure relief valve . . . . . . . 7 bar 207 - Pressure override valve . . . . . . . . . . . . . . . . . . . .
420 +30 bar 208 - High pressure, pressure relief valve . . . . . . . . . +30 bar 209 - Check valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 bar 210 - Short circuit valve 211 - Multifunction valve – reverse 212 - Multifunction valve – forwards 213 - Servo control valve 214 - Actuating pressure forward measuring port (M5) 215 - Actuating pressure backward measuring port (M4) 216 - Servo ram 217 - Axial ram adjustable pump . . . . . . . . . . . . . . . . . 100/130 cmі 218 - High pressure forward measuring port (M1) 219 - High pressure backward measuring port (M2) 220 - Fixed displacement motor . . . . . . . . . . . . . . . . . .
100 cmі 221 - Shuttle valve 222 - Purge valve 223 - Test port for charge pressure 225 - Short circuit valve for the servo line (optional) 515 - Pressure accumulator 751 - External feed valve (non-return valve) Y124 - Ground drive hydraulic motor brake restrictor (HBM) Note: The short circuit valve (225) in the fixed displacement motor (220) is only fitted when the machine is supplied with an hydraulic servo line. The short circuit valve (225) is operated for the switching line by the low pressure hydraulics (98). This enables both sides of the high pressure lines to short together, so that the drive control rods are unloaded during switching. 03/2004 7-5