CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Standard machine functions Valve cartridges in the directional-control valves Note: Whenever the valves are removed or replaced, then a new copper washer 094 001.0 must be fitted. K – Ball V – Control spool Some of the solenoid valve coils are fitted with a returns spring 213 030.1 , and have been marked with the letter “F” on the side. During a repair, solenoids not fitted with the returns spring, can be replaced against one that has. * - up to serial no. … (see spare parts catalogue) 03/2004 3-13 Pos.

Usage Top markings Lower markings Part number A Autopilot None 2 631 442.0 B Threshing drum speed faster Intake housing speed faster Reel forwards / backwards Reel raise Swinging out the unloading auger Cutterbar cross levelling Cutterbar folding in/out Safety valve for folding cutterbar Locking / unlocking the cutterbar springs Vario cutterbar in / out Uni-spreader up/down Maize header folding Snapping plates in / out None None 631 444.0 C Straw chopper forwards / backwards Folding in the unloading auger Reel lower 2 3 631 482.0 D Cutterbar lower * 1 3 631 483.0 E Threshing concave open / close 4 2 631 500.0 F Threshing speed slower Intake housing slower 3 3 631 421.1 G Safety valve for the unloading auger * No Lip None 631 525.0 H Uni-spreader control * None None 631 524.0