CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Standard machine functions Key to diagram 706 - Pressure relief valve . . . . . . . . . . . . . . . . . . . . . 90 ± 5 bar T - Tank port A - Concave left adjustment hydraulic ram port Pressure setting The spring in the pressure relief valve (706) is adjusted to 90 ± 5 bar . The setting of the valve can be corrected by adding or removing shims. The 0.5 mm shim will adjust it by about 7 bar and the 1.2 mm shim will adjust it by about 17 bar Note: These values are given to produce an average system pressure of 180 bar. After any adjustment or change, the system pressure must be checked.

Overload function The complete load of the concaves act on the hydraulic rams, and stand on the pressure relief valve (706). When an overload of about 2.5 t acts on the concave, the pressure relief valve adjusted to 90 ± 5 bar opens and dumps system pressure to tank. The threshing concave opens on its own until the load has passed, then is adjusted electronically back to the position it was at before the overload. 03/2004 3-39