CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Standard machine functions Key to diagram 747 - Double restrictor valve . . . . . . . . . . . . . . . . . . . . Ш 0,3 mm Y19 - Solenoid valve for slowing down the threshing drum speed Y20 - Solenoid valve for speeding up the threshing drum speed T - Connection to tank P1 - Pump connection via the returns valve A5 - Speed adjustment hydraulic ram port a - One-way restrictor valve – 1 notch b - One-way restrictor valve – 2 notches The oil in the hydraulic ram is locked at port A, by the ball in the valve insert. Function – neutral Function – speeding up the drum speed The solenoid valve (Y20) and the returns valve are switched.

The relative spool is then operated and pushes the ball off its seat. At the same time, the return flow to tank is blocked off. The pressure then builds up and pushes the ball of the other solenoid valve (Y19) off its seat. The oil then flows via the restrictor (747) and out through the port A. Function – slowing down the drum speed The solenoid valve (Y19) is switched without the returns valve. The respective spool is then operated and pushes the ball off its seat. At the same time, the return flow to tank is released via the two notches of the restrictor valve (747) and the valve insert of the non switched solenoid valve (Y20). Note:

So that speeding up and slowing down the drum speed are the same, the oil coming from the system when the variator is opening with the aid of the springs goes through the restrictor (b) with the two notches. Note: The solenoid for the “slow” function is fitted with a return spring and is marked with an “F” on the face side. 03/2004 3-41