CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

TIC LEXION 480-405 Standard machine functions Key to diagram 226 - Hydraulic motor for reversing the front attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OMR 200 353 - Hydraulic ram for reversing the front attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ш 22 mm 732 - One-way valve Y86 - Solenoid valve for reversing the front attachment T - Connection to tank P1 - Pump connection via the returns valve A8 - Front attachment reverse hydraulic ram port Function – neutral The spring pressure forces the oil out of the reversing ram (353) over the connection A-T in the solenoid (Y86) and back to tank. The connector P1 is blocked by the spool.

Function – reversing The solenoid valve (Y86) and the returns valve are operated. The flow to tank is closed by the spool and the solenoid valve (Y86) and the connection between P1 and port A is opened. The reversing ram (353) pushes the hydraulic motor (226) down onto the sprocket. Just before the reversing ram (353) reaches its end stop, full oil flow is supplied to the motor (226). The purpose for this is to ensure that the teeth are in mesh. The one way valve (732) stops the motor (226) from turning, should a hydraulic spike appear in the system. 03/2004 3-45