CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

CLAAS ACADEMY LEXION II Additional functions Key to diagram 110 - Oil tank 212 - Reel drive motor 213 - Reel drive pump . . . . . . . . . . . . . . . . . . . . . . . . 15 cmі 224 - Chaff / straw spreader drive pump 312 - Threshing mechanism clutch 356 - Reel drive control variable displacement pump 424 - Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 mm 406 - Orifice plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 mm 512 - Reel drive accumulator 706 - Pressure relief valve . . . . . . . . . . . . . . . . . . . . . 140 bar 707 - Pressure holding valve (One-way valve) 744 - Reel drive feed valve 745 - Reel drive feed pressure limit valve . . . . .

. . . (blocked) 746 - Reel drive purge valve . . . . . . . . . . . . . . . . . . . 25 bar 801 - Quick release coupling 913 - Measuring port for reel drive high pressure forward 914 - Measuring port for reel drive high pressure backward 915 - Measuring port for reel drive charge pressure Y21 - Solenoid valve for threshing engagement Y95 - Solenoid valve for speeding up the reel speed Y96 - Solenoid valve for slowing down the reel speed A - Consumer port P - Pump port T - Tank port Function Hydraulic reel speed control is realized using a variable displacement axial piston pump (213). The pump drive and therefore the sense of rotation depends on the front attachment.

With the threshing mechanism engaged, the system is supplied with oil (low-pressure hydraulic system). Cylinder (356) is controlled by solenoid valves (Y95/Y96) and determines the angle (= displaced volume) of the axial piston pump (213). The solenoid valves (Y95/Y96) are activated by the reel module in a modulated way. In the respective high-pressure circuit, the pressure relief valves (706) protect the system at 140 bar. To protect the system against overheating, a certain oil quantity is purged out from the return circuit via purge valve (746) when the "Reel forward" function is activated.

Purge valve (746) is hydraulically blocked when the "Reel backward" function is activated, thus avoiding purging out via the high-pressure circuit. Should the reel run on after the threshing mechanism is shut down, accumulator (512) keeps pump and motor from running dry. 11/2001 4-13