CLAAS LEXION II (480 - 405) — gb 00 Deckblatt

CLAAS ACADEMY LEXION II Additional functions Key to diagram 406 - Restrictor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ш 0.8 mm 507 - Position accumulator for Uni-spreader . . . . . .

0.075 l / 60 bar 734 - One-way valve (lock-up valve unit) Y74 - Solenoid valve for moving straw chopper in work position Y75 - Solenoid valve for moving straw chopper in park position Y81 - Solenoid valve for moving Uni-spreader in work position Y82 - Solenoid valve for moving Uni-spreader in park position T - Connection to tank P1 - Pump connection via returns valve A2 - Hydraulic ram port for Uni-spreader/straw chopper park position B2 - Hydraulic ram port for Uni-spreader/straw chopper work position K - Plunger Both sides of the ram are locked up by the one-way valves (734) at ports A and B.

Function – neutral Function When it is required to move in a particular direction, the relative solenoid valve (Y74/Y75/Y81/82) is operated along with the returns valve. The activated solenoid pushes the ball of its seat and closes to flow to tank. The pressure then builds up against the plunger (K) which in turn opens the opposite lock valve (734) on part A or B. The return flow from the ram, then flows back via the non switched solenoid (Y74/Y75/Y81/82) back to tank. The pressure builds in the lock valve, opening the second lock valve (734) and this allows the oil to flow out to the ram, either extending or retracting it.

Pressure limit Because the diameter of the ram is relatively small, the pressure is limited to approx. 120 bar . Because of the requirement of the valve inserts and the relatively large size of ball, it is not enough to rely on the electromagnetic force of the solenoid to maintain system pressure. For this reason the ball in the valve unit will release oil at 120 bar. Note: The valve insert with the pressure control is only fitted to the chopper adjustment on the straw walker machines. The adjustment of the Uni-spreader on the rotor machine is done by a spool valve at system pressure of 175 ± 15 bar. 11/2001 4-25