19-162 19-162 Electrical System Troubleshooting Inspection 2: Inspect the EFI main relay. (1) Inspect the EFI main relay operation. Ignition key switch ON, inspect the operation of the EFI main relay Standard: The EFI main relay makes an operating sound in coordination with the ignition key switch (2) Inspect for continuity between each of the terminals of the relay Ignition key switch OFF, remove EFI main relay Standard: EFI relay (3) Inspect for continuity between relay terminals 3 and 5 when the battery voltage is applied accross terminals 1 to 2. Standard: Continuity exists Inspection 3: Inspect for continuity of the wire harness. Ignition key switch OFF Standard:
Section 19 Relay terminals 1 ~ 2 Continuity Relay terminals 3 ~ 5 No continuity Main relay ~ fuel changeover switch Continuity Fuel changeover switch ~ GAS Continuity FC ~ Circuit opening relay Continuity Circuit opening relay ~ GND Continuity Fuel changeover switch ~ Circuit opening relay Continuity Circuit opening relay ~ Fuel pump Continuity Fuel pump ~ GND Continuity