19-36 19-36 Electrical System Troubleshooting Inspection 1: Carry out throttle motor individual inspection. Ignition key switch OFF, disconnect G6, connect G27 1 2 3 4 5 6 (1) Throttle motor resistance inspection G6 Standard: (Motor side) (2) Throttle valve drive condition Standard: Throttle valve operates smoothly when fully opened. Throttle valve operates smoothly when fully closed. When you remove your hand from the throttle valve, it returns to the opener angle. Inspection 2: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect G27 and G6 Standard:
Section 19 G6-2 ~ G6-1 0.3 ~ 100 Ω (20°C) G27-6 ~ G6-2 Continuity G27-5 ~ G6-1 Continuity G27-6 ~ Frame No continuity G27-5 ~ Frame No continuity G27-6 ~ G27-5 No continuity G27-6 ~ G27-7 No continuity G27-5 ~ G27-7 No continuity