Toyota — Service Manual Change History

19-37 Electrical System Troubleshooting z Error codes 06-3, 06-4 (Throttle motor power circuit open/short abnormality) Related portion G27 Probable cause c Harness defect d Engine controller defect Error codes 06-3 and 06-4 Connector contact defect Harness defect Engine controller defect Inspection 1: Inspect the throttle motor power voltage. Ignition key switch OFF, disconnect G27 Standard:

Section 19 Engine controller AG1 E-THRO 7 (+BM) 13 TAB REC B C TA RE Disconnect the battery negative terminal (for more than 10 seconds), after inspecting and correcting disconnection and water entry of G27, AG1, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (start the engine) and check whether or not there is an error. No error Error Inspection 1: Throttle motor power voltage inspection OK G27-7 ~ Frame 8 ~ 16 V