Toyota — Service Manual Change History

19-38 19-38 Electrical System Troubleshooting z Error code 06-5 (Throttle motor seized abnormality) Related portion E-THRO G27 7 (+BM) AG1 G6 13 1 (M-) Engine controller Throttle motor 6 (M+) 2 (M+) 5 (M-) 4 (ME01) Probable cause c Throttle motor defect d Harness defect e Engine controller defect Error code 06-5 Connector contact defect Throttle motor defect Harness defect Engine controller defect Inspection 1: Carry out throttle motor individual inspection. 1 2 3 4 5 6 Ignition key switch OFF, disconnect G6, connect G27 G6 (1) Throttle motor resistance inspection Standard: (Motor side) (2) Throttle valve drive condition Standard: Throttle valve operates smoothly when fully opened.

Throttle valve operates smoothly when fully closed. When you remove your hand from the throttle valve, it returns to the opener angle Section 19 B C TA RE Disconnect the battery negative terminal (for more than 10 seconds), after inspecting and correcting disconnection and water entry of G6, AG1, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (start the engine) and check whether or not there is an error. No error Error Inspection 1: Throttle motor individual inspection OK Inspection 2: Harness continuity and short circuit inspection OK G6-2 ~ G6-1 0.3 ~ 100 Ω (20°C)