Toyota — Service Manual Change History

19-47 Electrical System Troubleshooting z Error code 0A-1, 0A-2, 0A-3 (Fuel specification determination abnormality) Related portion G28 G88 Probable cause c Fuel changeover switch defect d Harness defect e Engine controller defect Error codes 0A-1, 0A-2, 0A-3 Connector contact defect Fuel changeover switch defect Harness defect Engine controller defect Section 19 Engine controller 14 (GAS) 3 (GAS) Fuel 13 (LPG) 1 (LPG) changeover G27 2 (IG) switch 15 (SEL1) 14 (SEL2) 3 (L) EFI main relay 13 (SEL3) 12 (SEL4) 10 (ESEL) Fuel changeover switch Disconnect the battery negative terminal (for more than 10 seconds), after inspecting and correcting disconnection and water entry of G88, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (start the engine) and check whether or not there is an error.

No error Error Inspection 1: Switch input signal inspection ANL.: I/O ENGINE CTRL 1/10 OK Inspection 2: Fuel changeover switch individual inspection OK Inspection 3: Harness continuity and short circuit inspection OK