Toyota — Service Manual Change History

19-70 19-70 Electrical System Troubleshooting Inspection 2: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect A19 and A21 Standard: Error code 51-2 Connector contact defect Sensor defect Harness defect SAS/OPS controller defect Inspection 1: Ignition key switch OFF, disconnect A19, ignition key switch ON, engine stopped 51-2 displayed to next inspection 51-1 displayed Speed sensor defect Inspection 2: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect A19 and A21 Standard:

Section 19 A21-22 ~ A19-1 Continuity A21-23 ~ A19-2 Continuity A21-22 ~ Frame No continuity A21-23 ~ Frame No continuity Disconnect the battery negative terminal, after inspecting and correcting disconnection of A19 and A21 and internal moisture, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (engine stopped) and check whether or not there is an error. No error Error Inspection 1: Speed sensor inspection 51-2 is displayed Inspection 2: Harness continuity and short circuit inspection OK A21-22 ~ A19-1 Continuity A21-23 ~ A19-2 Continuity A21-22 ~ Frame No continuity A21-23 ~ Frame No continuity