Toyota — Service Manual Change History

19-75 Electrical System Troubleshooting z Error codes 61-1, 61-2 (Load sensor abnormality) Related portion A21 A18 Probable cause c Connector contact defect d Load sensor defect e Harness defect f SAS/OPS controller defect Error code 61-1 Connector contact defect Load sensor defect Main harness defect SAS/OPS controller defect Main harness defect Inspection 1: Carry out load sensor individual inspection.

Ignition key switch OFF, disconnect A18, use SST 09230-13700- 71 to short circuit A18-1 and A18-2 (main harness side), ignition key switch ON, engine stopped 61-1 displayed to inspection 2 61-2 displayed load sensor defect Section 19 SAS/OPS controller 19 (5PRS) 1 (B) 27 (PRES) 2 (P) 5 (E2) 3 (E) Load sensor Disconnect the battery negative terminal, after inspecting and correcting disconnection and water entry of A18 and A21, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (engine stopped) and check whether or not there is an error. No error Error Inspection 1: Load sensor individual inspection 61-1 is displayed Inspection 2:

Harness continuity and short circuit inspection Continuity Inspection 3: Harness continuity and short circuit inspection Continuity SST