Toyota — Service Manual Change History

19-78 19-78 Electrical System Troubleshooting z Error codes 62-1, 62-2 (Tilt angle sensor abnormality) Related portion A21 A42 Probable cause c Connector contact defect d Tilt angle sensor harness defect e Tilt angle sensor defect f SAS/OPS controller defect Error code 62-1 Connector contact defect Tilt angle sensor defect Main harness defect SAS/OPS controller defect Main harness defect Inspection 1: Carry out tilt angle sensor individual inspection.

Ignition key switch OFF, disconnect A42, use SST 09232-13130-71 to short circuit A42-1 and A42-2 (main harness side), ignition key switch ON (engine stopped) 62-1 displayed to inspection 2 62-2 displayed tilt angle sensor defect Section 19 SAS/OPS controller 28 (5MA) 1 32 (MA) 2 5 (E2) 3 Tilt angle sensor Disconnect the battery negative terminal, after inspecting and correcting disconnection and water entry of A21 and A42, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (engine stopped) and check whether or not there is an error. No error Error Inspection 1: Tilt angle sensor individual inspection 62-1 is displayed Inspection 2:

Harness continuity and short circuit inspection Continuity Inspection 3: Harness continuity and short circuit inspection Continuity