Toyota — Service Manual Change History

19-84 19-84 Electrical System Troubleshooting z Error code 64-1 (Lift lock solenoid abnormality) Related portion A20 A11 7 (LSOL) 1 Lift lock solenoid 2 SAS/OPS controller 8 (E01) 9 (E02) Probable cause c Connector contact defect d Harness defect e Lift lock solenoid defect f SAS/OPS controller defect Error code 64-1 Connector contact defect Harness defect Solenoid defect SAS/OPS controller defect *: Make sure that no error is displayed when the material handling lever is lowered. Inspection 1: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect A11 and A20 Standard:

Section 19 Disconnect the battery negative terminal, after inspecting and correcting disconnection and water entry of A11 and A20, reconnect all connectors and the battery negative terminal, turn the ignition key switch ON (engine stopped) and check whether or not there is an error.* No error Error Inspection 1: Harness continuity and short circuit inspection OK Inspection 2: Lift lock solenoid individual inspection OK A20-7 ~ A11-1 Continuity A11-2 ~ Frame Continuity A20-9 ~ Frame Continuity A20-8 ~ Frame Continuity A20-7 ~ Frame No continuity