19-83 Electrical System Troubleshooting Inspection 2: Individual continuity inspection of the tilt lever switch (still installed on the vehicle). Ignition key switch OFF, disconnect A13 Standard: (Switch side) Inspection 3: Carry out individual continuity inspection of the tilt lever switch (removed from the vehicle). Ignition key switch OFF, disconnect A13 Standard: (Switch side) 2 1 3 4 A13 Inspection 4: Inspect for continuity and short circuiting of the harness. Ignition key switch OFF, disconnect A13 and A20 Standard:
Section 19 Lever in neutral position Lever in forward tilt position Lever in backward tilt position A13-1 ~ A13-2 No continuity Continuity No continuity A13-3 ~ A13-4 No continuity No continuity Continuity Switch OFF Switch ON A13-1 ~ A13-2 No continuity Continuity A13-3 ~ A13-4 No continuity No continuity A20-20 ~ A20-1 No continuity A20-21 ~ A20-1 No continuity A20-20 ~ A20-21 No continuity A20-20 ~ Frame No continuity A20-21 ~ Frame No continuity