OM3035.3 02/03 Operation - Section 3 Instrument Panel & Indicator Lights Page 3-23 INSTRUMENT PANEL AND INDICATOR LIGHTS CONTROL SYMBOLS Many control functions are identified with "International" symbols that the operator should learn to recognize imme- diately. The operator must understand the function and operation of each instrument and control. This knowledge is essential for proper and safe operation of the machine. The following symbols are general indicators and may appear in multiple locations and combinations on the instru- ment panel. This symbol may be used alone or with another symbol. This symbol identifies the “Off” posi- tion of a switch or control.
This symbol may be used alone or with another symbol. This sym- bol identifies the “On” position of a switch or control. This symbol identifies the “Pushed-In” position of a push- pull switch or control. This symbol identifies the “Pulled- Out” position of a push-pull switch or control. INSTRUMENT PANEL (Figure 3-6) The operator must understand the function and oper- ation of each instrument and control. Control func- tions are identified with “International” symbols that the operator should learn to recognize immediately. This knowledge is essential for proper and safe oper- ation. Items that are marked OPTIONAL do not apply to every truck.
This symbol w an indicator o that this indic NOT used. This symb control or s clockwise o functions. ol witc r c