Komatsu — 100 HOUR LUBRICATION AND MAINTENANCE CHECKS

OM4035.1 01/04 Maintenance - Section 4 Lubrication and Service Page 4-7 100 HOUR LUBRICATION AND MAINTENANCE CHECKS Maintenance for every 10 & 50 hour Lubrication and Maintenance Checks should also be carried out at this time. Truck Serial Number __________________________ Site Unit Number _____________________________ Date: __________ Hour Meter __________________ Name of Service Person _______________________ 1.REAR HYDRAIR® SUSPENSION PIN JOINTS - (If not equipped with automatic lube system) - Add one or two applications of grease to each grease fitting for the upper and lower suspension mount pins. Use Lube Key "D". 2.

BODY HINGE PINS - (If not equipped with automatic lube system) - Add one or two applications of grease to each grease fitting. Lube Key "D" for the body hinge pins. 3. HOIST CYLINDER - (If not equipped with automatic lube system) - Add one or two applications of grease to each grease fitting for bearing and pivots. Use Lube Key "D". 4. ANTI-SWAY BAR - (If not equipped with automatic lube system) - Add one or two applications of grease to each grease fitting for pin and bearings. Use Lube Key "D". 5. HYDRAULIC OIL FILTERS - Change filter elements after the initial 100 hours of operation; then at 250 hours; and then each 500 hours of operation thereafter. COMMENTS CHECKED INITIALS