. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE 3. After adding distilled water, tighten cap (2) securely. battery, or there is no display of the UPPER LEVEL line) without fail. (A) Suitable level: Electrolyte level is up to bottom of sleeve, so surface tension causes electrolyte REMARK 4 - 49 2. If the electrolyte l evel is below the midway poin t between the UPPER LEVEL ( cap (2) and add replenishment wa U.L.) and LOWER LEVEL (L.L. ) lines, remove purified water (e.g. commerc ially available ne. ter for a battery) to the U.L. li If distilled water is ad ded to above the UPPER LEVEL (U.L.) line, use a syringe to lowe r the level to the UPPER LEV EL (U.L.) line.
Neutralize the rem oved fluid with baking s sh it away with a large amou oda (sodium nt of water or bicarbonate), then flu consult your Komats u distributor or battery maker. REMARK ry Large Capacity Batte With the cell at the rear of the machine (R), chec k from the side of the battery, an UPPER LEVEL li line. d if the battery electrolyte is not up to the ne, add distilled water to the UPPER LEVEL With the cell at th e front of the machine (F), rem ove cap (2) at the top of the batt the UPPER LEV LEVEL line.
ery, and if the battery electroly te is not up to EL line, add distilled water to the UPPER However, only wit h cap (B), it is difficult to check the electrolyte level from the side , so check with the supplied m irror. When it is Impossible to Check Electrolyte Level from Side of Battery If it is impossible to c heck the electrolyte level fro he LEVEL line on the si de of the battery, check as foll 1. Remove cap (2) a t the top of the battery, look thr ough the water nd check the electrolyte su not reach the sleeve (4), add rface. If the purified water y available replenishment wate reaches the bottom of the sl r for a battery) eeve (UPPER appear bent.
olyte level is not up to bottom appear straight and not bent. 2. After adding distil led water, tighten cap (2) secu to remove electrolyt sodium bicarbonate, e. Neutralize the removed e then flush it away with a lar lectrolyte with ge amount of water. If necessary battery maker.