Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE EVERY 500 HOURS MAINTENANCE 4 - 51 Maintenance for every 10 0 and 250 hours sho uld be ca rried out a LUBRICATING NOTICE NOTICE I f any a bnormal noise is g enerated from any grea sing poin t, carr y out g reasing regardless of the grea Carry o ut greasing every 10 hours for the first 50 hours on a new machine. grease the wet pins. After th e machine was su bjected to jobs in the w ater, be su re to grease When c arrying out heavy- duty operations , such as hydraul ic breaker o perations, carry out the greasin 1. right, lower the work equipm ent to the ground, th en stop t he engine. 2. Using a grease pum fitting s shown by arro 3.

After greasing, wipe o ff any old grease tha t was pu shed (1) Boom cylinder foot pin (2) Boom foot pin (2 place (3) Boom cylinder rod end pin (2 places (4) Arm c ylinder foot pin ( (5) Boom - Arm coupling (6) Arm c ylinder rod end ( (7) Bucke t cylinder foot pi