. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING position (S). 4 - 64 EVERY 1000 HOURS MAINTENANCE Carry out the per iodic maintenance work of ev ery 100, 250 and 500 hours of operatio After the engine has been operated, all parts are a t high temperature, so do not replace the filter immediately. Wait for all parts to cool down be fore starting the operation. l piping system when the engine is running. High pressure is generated inside the engine fue When replacing the filter, wait for at least 30 sec onds after stopping the engine to let the int ernal pressure go down before replacing the filt er. fire or flame close.
Do not bring any NOTICE Genuine Komats u fuel filter cartridges use a sp ecial filter that has highly efficient filtering ab ility. When replacing the filter cartridge, alway s use a genuine Komatsu part. The common rai l fuel injection system used on t his machine consists of more precise parts t han the conventional injection pump and nozzl e. If any part other than a genuine Komatsu filter ca rtridge is used, dust or dirt may get in and ca use problems with the injection system. Always avoid using substitute parts. When carrying o ut inspection or maintenance of the fuel system, pay more attention than nor mal to the entry of dirt.
If dirt is stuck to any par t, use fuel to wash it off complet ely. sconnect the hose connecting. When replacing the fuel filter cartridge, do not di Prepare a con Prepare a filter 1. Turn the valv e (1) at the bottom of the fuel 2. Open the eng 3. Set the conta 4. Using a filter to remove it. 5. Clean the filte r holder, coat the packing sur cartridge thinl holder.