4) HOLDING VALVE OPERATION Holding operation At neutral condition, the pilot piston chamber is connected to drain port through the pilot port. And the main piston is seated by the spring B. Also, the pressurized oil from the actuator entered to inside of the holding valve through the periphery hole of the main poppet, crevice of the main poppet and the restrictor and the periphery hole of the restrictor. Then, this pressured oil pushed the pilot poppet to the poppet seat and the main poppet to the seat of body. So the pressurized oil from the holding side of the actuator is not escaped and the actuator is not moved.
(1) Pilot poppet Spring Actuator port Pilot piston Pilot port for holding valve releasing Drain port Main poppet Piston guide Pilot piston chamber Main piston Spring B Poppet seat Restrictor HOLDING VALVE BLOCK SECTION 220S2MC24 2-38