Bucket slow operation (incase bucket in) This function is used to speed up of the boom or arm by reducing the bucket speed when the bucket operation with boom or arm operation simultaneously. The bucket slow pilot pressure is supplied the pilot port of the BC1 spool and the piston is shifted to the right and then the bucket spool stroke is limited and the oil passage from P1 to the bucket cylinder is reduced and the oil flow of the bucket spool is reduced. (2) Bucket flow summation function, bypass cut-off 1 spool During the bucket in operation, the pilot secondary pressure from the RCV is supplied to port of the spring side and shifts the BC1 (bucket) spool to the right direction.
The P2 parallel passage is shut off by the movement of the BC1 spool and the pressurized oil from P2 port opens the check poppet and combined with the flow of the bucket spool. (Only bucket in operation) RCV signal Bucket Bucket flow summation passage Option Open check poppet and combined with oil flow of bucket spool F-F' (OPTION AND BUCKET) Z Z SECTION Z-Z Bucket in RCV signal BC1 spool (bucket) Z Z P2 parallel passage G-G' (BYPASS CUT & NEGATIVE CONTROL) FLOW SUMMATION BY THE SHIFTING OF THE BC1 SPOOL 220S2MC27 2-41