OPERATION DISPLAY SELECTION BUTTON (TIME) On this machine, priority is given to the frequency display. When the frequency is being displayed, press button (4) and the display will show the present time for 5 seconds. After 5 seconds pass, the display returns automatically to the frequency display. If any button other than TIME ADJ (H, M, ADJ) is pressed within 5 seconds, the display returns to the frequency display. AS/PS BUTTON This button (5) actuates the auto store and preset scan functions.
Auto store If this button is pressed for more than 2 seconds during radio reception, a search is made automatically of the 6 station settings to find an unused preset number, and that frequency is stored in the preset memory. Preset scan If this button is pressed within 2 seconds, it is possible to select one of the already preset stations. Wait for 6 sec. after pressing the button and then press the button again to select the next preset station. If it is impossible to receive the preset frequency, the selection advances after 1 second to the next preset station.
PRESET STATION BUTTONS (1, 2, 3, 4, 5, 6) If this button (6) has been used to decide which stations to preset, it is possible to select the desired station at a touch. It is possible to preset 6 stations each for both AM and FM. DISPLAY In this display (7), receiving band, frequency, preset No. and time are shown. TIME RESET BUTTON Use this button (8) when adjusting the time. H : Hour M : Minute ADJ : Sets to 00 minutes TUNING BUTTON (TUNING) MANUAL TUNING (MANUAL) Use this button (9) to change the frequency. 2-64 PC400LC-7E0