Komatsu — MOVING MACHINE FORWARD

OPERATION 3. Turn fuel control dial towards the full speed position to increase the engine speed. MOVING MACHINE FORWARD 1. Set lock lever (4) in the FREE position (F), fold the work equipment, and raise it 40 to 50 cm (16 to 20 in) from the ground. 2. Operate the right and left travel levers (5), or the right or left travel pedals (6) as follows: When sprocket (A) is at the front of the machine: Slowly push the levers (5) forward, or slowly depress the front part of the pedals (6) to move the machine backward. When sprocket is situated at the front of the machine: Start the machine either by pulling lever (5) back slowly or by stepping on the rear part of pedal (6) slowly. 3.

Check that the travel alarm sounds properly. If the travel alarm does not sound, please contact your Komatsu distributor for repair. Remark In cold temperatures, if the machine travel speed is not normal, thoroughly perform the warming-up operation. In addition, if the undercarriage is clogged with mud and the machine travel speed is not normal, remove the soil and mud from the undercarriage. 2-94 PC400LC-7E0