OPERATION MOVING MACHINE BACKWARD 1. Set lock lever (4) in the FREE position (F), fold the work equipment, and raise it 40 to 50 cm (16 to 20 in) from the ground. 2. Operate the right and left travel levers (5), or the right or left travel ped- als (6) as follows: When sprocket (A) is at the rear of the machine: Slowly pull the levers (5) backward, or slowly depress the rear part of the pedals (6) to move the machine backward. When sprocket (A) is at the front of the machine: Slowly push the levers (5) forward, or slowly depress the front part of the pedals (6) to move the machine backward. 3. Check that the travel alarm sounds properly.
If the travel alarm does not sound, please contact your Komatsu distributor for repair. Remark In cold temperatures, if the machine travel speed is not normal, thoroughly perform the warming-up operation. In addition, if the undercarriage is clogged with mud and the machine travel speed is not normal, remove the soil and mud from the undercarriage. PC400LC-7E0 2-95