Komatsu — SECURING MACHINE

11. When the machine travels over the rear wheels of the trailer, it becomes unstable, drive slowly and carefully. (Never operate the steering.) 12. At the moment the machine passes the rear wheels, it tilts forward, be careful not to let the work equipment hit the trailer body. Drive the machine forward to the specified position, then stop the machine. 13. Lower the work equipment on top of wooden blocks. OPERATION SECURING MACHINE Remark Stow the antenna and reassemble the mirrors so that they are within the width of the machine. To prevent damage to the bucket cylinder during transportation, fit a wooden block at one end of the bucket cylinder to prevent it from touching the floor.

Load the machine onto a trailer as follows: 1. Extend the bucket and arm cylinders fully, then lower the boom slowly. 2. Set the lock lever securely to the LOCK position (L). 3. Stop the engine, then remove the key from the ignition switch. 4. Close all doors, windows, and covers. Lock the covers, caps, and doors fitted with locks. 5. Place blocks under both ends of the tracks to prevent the machine from moving during transportation, and secure the machine with chains or wire rope of suitable strength. Be particularly careful to secure the machine in position so it does not slip to the side. 2-122 PC400LC-7E0