OPERATION REMOVING, INSTALLING MIRRORS If they are damaged, or are to be removed for shipment, or are to be installed again, use the following procedure. Removal 1. Loosen locknut (2) of mirror (1), then remove mirror (1) from support (3). Loosen bolt (4), then remove support (3) and clamp (5) from the handrail. Installation 1. Install support (3) and clamp (5) to the handrail, then tighten bolt (4). Install mirror (1) to support (3), then tighten locknut (2). UNLOADING THE MACHINE 1. Never lift the machine off the trailer body with the work equipment, loss of control or a rollover situation may result. 2.
Always unload on level stable ground using the properly sized ramps with the trailer wheels chocked. Maintain a safe distance from the edge of the road. PC400LC-7E0 2-123