Komatsu — CHECK, ADJUST TENSION OF AIR CONDITIONER COMPRESSOR BELT

MAINTENANCE CHECK, ADJUST TENSION OF AIR CONDITIONER COMPRESSOR BELT INSPECTION The deflection of the belt should be approximately 13 mm (0.5 in) when pressed with a finger force of approximately 58.8N (6 kgf) at mid-point (a) between the alternator pulley and the fan pulley. (A) Alternator pulley (B) Fan pulley (C) Crankshaft pulley ADJUSTMENT 1. Loosen bolts and nuts (1), (2), (3). 2. Turn nut (4) clockwise to move alternator (5) so that the belt deflects by approximately 13 mm (0.5 in) with applied force of approximately 6 kg (58.8 N). 3. Tighten bolts and nuts (1), (2) and (3) to secure alternator (5). Torque: Lock nut (1) and (4):. . . . . 137.2 ± 53.9 Nm (101.3 ± 39.8 lbft) Bolt (2): .

. . . . . . . . . . . . . . . . . 33.3 ± 4.9 Nm (24.6 ± 3.6 lbft) Bolt (3): . . . . . . . . . . . . . . . 127.4 ± 19.6 Nm (94.0 ± 14.5 lbft) Remark Check each pulley for damage, wear of the V-groove, and wear of the V-belt. In particular, be sure to check that the V-belt is not touching the bottom of the V-groove. In case any of the following occurs, ask the Komatsu distributor in your territory to replace the belts with new ones. The fan belt has elongated, leaving little allowance for adjustment. A cut or crack is found on the belt. Slipping or creaking sound is heard coming from the belt. When the new V-belt is set, readjust it after one hour of operation. PC400LC-7E0 3-49