MAINTENANCE CHECK SWING PINION GREASE LEVEL, ADD GREASE Prepare a scale. 1. Swing 3 times each to the left and right, then stop the machine. 2. Remove bolts (1) (2 bolts) on the top of the revolving frame and remove cover (2). 3. Insert scale (3) through inspection and maintenance hole (A) into the grease, and check to be sure height (S) of the grease is at least 54 mm (2.1 in). If the grease level is low, add grease. 4. Check if the grease is milky white. If it is milky white, it is necessary to change the grease. Please contact your Komatsu distributor. Grease: . . . . . . . . . . . . . . . . . . . . 33 liters (8.7 US gal, 65 lb). 5. Install cover (2) with bolts (1). PC400LC-7E0 3-55