Komatsu — GAUGES

OPERATION GAUGES ENGINE WATER TEMPERATURE GAUGE This meter (8) indicates the engine cooling water temperature. During normal operations, the indicator should be in the black range. If the indicator enters the red range during operations, the overheat prevention system is actuated. The overheat prevention system acts as follows. Red range position ( A ) : Engine water temperature monitor (D) lights up red Engine speed is reduced to low idle, engine water temperature monitor lamp (C) lights up red, and the alarm buzzer sounds at the same time. Red range position ( B ) : The overheat prevention system remains actuated until the indicator returns to the black range.

When the engine is started, if the indicator is at position (C), engine water temperature monitor (D) lights up white. In this case, carry out the warm-up operation. For details, see “WARMING UP ENGINE” on page 2-85. FUEL GAUGE This meter (9) displays the level of fuel in the fuel tank. During operations, the indicator should be in the black range. If the indicator enters red range (A) during operations, there are less than 110 liters (29.06 US gal) of fuel remaining in the tank, so check and add fuel. Remark If the indicator enters red range (B), there are less than 80 liters (21.14 US gal) of fuel remaining.

When the indicator is in the red range (A) to (B), fuel level monitor (D) lights up red. The correct fuel may not be displayed for a short time when the ignition switch is turned ON, but this is not an abnormality. 2-18 PC400LC-7E0