OPERATION HYDRAULIC OIL TEMPERATURE GAUGE This meter (10) displays the hydraulic oil temperature. During operations, the indicator should be in the black range. If the indicator enters red range (A) during operations, the hydraulic oil temperature has gone above 102°C (215.6°F). Stop the engine or run it at low idle and wait for the hydraulic oil temperature to go down. Remark When the indicator is in the red range (A) to (B), the hydraulic oil temperature is as follows. When the indicator is in the red range (A) to (B), hydraulic oil temperature monitor (D) lights up red.
If the indicator is at position (C) when the engine is started, the hydraulic oil temperature is more than 20°C (68°F), and hydraulic oil temperature monitor (D) lights up white. In this case, carry out the warm-up operation. For details, see “WARMING UP HYDRAU- LIC EQUIPMENT” on page 2-87 . SERVICE METER This monitor (11) displays the total time that the machine has been operated. Use the time display to set the maintenance interval. When the ignition switch is ON, the service meter advances even if the machine is not moving. The service meter advances by 1 for every hour of operation, regardless of the engine speed. PC400LC-7E0 2-19