Komatsu — TRAVEL SPEED SELECTOR SWITCH

OPERATION TRAVEL SPEED SELECTOR SWITCH When loading or unloading from a trailer, always travel at low speed (with the travel speed selector switch (3) at the Lo position). Never operate the travel speed selector switch (3) during the loading or unloading operation. If the travel speed is switched between high and low when the machine is traveling, the machine may deviate to one side, even when traveling in a straight line. Stop the machine before switching the travel speed. This switch (3) is used to set the travel speed to 3 stages. Lo lights up : Low-speed travel Mi lights up : Medium-speed travel Hi lights up :

Hi-speed travel When the engine is started, the speed is automatically set to Lo. Each time that the switch is pressed, the display changes Lo Mi Hi Lo in turn. When traveling in high speed (Hi) or medium speed (Mi), if travel power is needed, such as when traveling on soft ground or on slopes, the speed automatically switches to low speed (Lo), there is no need to operate the switch. The monitor display (GG) stays at Hi or Mi. Remark Each time that the travel speed selector switch is operated, the mode is displayed in the center of the monitor display portion (GG), and the screen (BB) returns to the normal screen after 2 seconds. PC400LC-7E0 2-23