Komatsu — WINDOW WASHER SWITCH

OPERATION WIPER SWITCH This switch (4) operates the wiper for the front glass. Each time the switch is pressed, it changes ON INT stop (OFF). Display (GG) INT is illuminated Wiper moves intermittently Display (GG) ON is illuminated Wiper moves continuously Remark Each time the wiper switch is operated, the mode is displayed in the center of the monitor display (GG). The screen returns to the normal screen (BB) after 2 seconds. WINDOW WASHER SWITCH When this switch (5) is kept continuously pressed, window washer fluid is sprayed out on the front glass. When the switch is released, the spray stops.

If switch (5) is kept pressed when the wiper is stopped, the window washer fluid will spray out, and at the same time, the wiper will be actuated continuously. When switch (5) is released, the wiper will continue to operate continuously for 2 cycles, and will then stop. If the wiper is moving intermittently and switch (5) is kept pressed continuously, the window washer fluid will spray out, and at the same time, the wiper will be actuated continuously. When switch (5) is released, the wiper will continue to operate continuously for 2 cycles, and will then return to intermittent operation. 2-24 PC400LC-7E0 Display (GG) OFF is illuminated Wiper stops